Atomic layer deposition ALD has received increasing attention in relation to the growth of high-permittivity rare-earth oxides for advanced gate stack applications. Transistor reliability strongly depends on the oxide/semiconductor interface properties. In this study, we perform transmission electron microscopy measurements in the high-resolution mode coupled with electron energy loss spectroscopy experiments to probe at the nanometric scale interface layer IL issues for ALD-grown La2O3/Si stacks. Complementary results from electrical and X-ray diffraction measurements on selected samples are also discussed. We demonstrate that the La2O3 film reactivity with the Si surface can be controlled up to a certain extent by appropriately choosing the ALD precursor combination. In particular, we prove that the LaCp3 + O3 scheme is more attractive than the LaCp3 + H2O one for depositing La2O3 films because it gives rise to a lower IL thickness and interface trap density and to a smaller critical sample thickness for the stabilization of the high- hexagonal La2O3 phase.

Chemical/Structural Nanocharacterization and Electrical Properties of ALD-Grown La2O3ÕSi Interfaces for Advanced Gate Stacks

C Wiemer;G Scarel;M Fanciulli
2009

Abstract

Atomic layer deposition ALD has received increasing attention in relation to the growth of high-permittivity rare-earth oxides for advanced gate stack applications. Transistor reliability strongly depends on the oxide/semiconductor interface properties. In this study, we perform transmission electron microscopy measurements in the high-resolution mode coupled with electron energy loss spectroscopy experiments to probe at the nanometric scale interface layer IL issues for ALD-grown La2O3/Si stacks. Complementary results from electrical and X-ray diffraction measurements on selected samples are also discussed. We demonstrate that the La2O3 film reactivity with the Si surface can be controlled up to a certain extent by appropriately choosing the ALD precursor combination. In particular, we prove that the LaCp3 + O3 scheme is more attractive than the LaCp3 + H2O one for depositing La2O3 films because it gives rise to a lower IL thickness and interface trap density and to a smaller critical sample thickness for the stabilization of the high- hexagonal La2O3 phase.
2009
RARE-EARTH-OXIDES; THIN-FILMS; DIELECTRICS; SI(001); LAYERS; GD2O3; DEPOSITION; STABILITY; INSULATOR; SILICON
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/157229
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact