We present a study on n-type ternary InGaN layers grown by atmospheric pressure metalorganic vapour phase epitaxy (MOVPE) on GaN template/(0001) sapphire substrate. An investigation of the different growth conditions on n-type Inx Ga1 − x N (x = 0.06 − 0.135) alloys was done for a series of five samples. The structural, electrical and optical properties were characterized by high resolution x-ray diffraction (HRXRD), Hall effect and photoluminescence (PL). Experimental results showed that different growth conditions, namely substrate rotation (SR) and change of total H2 flow (THF), strongly affect the properties of InGaN layers. This case can be clearly observed from the analytical results. When the SR speed decreased, the HRXRD scan peak of the samples shifted along a higher angle. Therefore, increasing the SR speed changed important structural properties of InGaN alloys such as peak broadening, values of strain, lattice parameters and defects including tilt, twist and dislocation density. From PL results it is observed that the growth conditions can be changed to control the emission wavelength and it is possible to shift the emission wavelength towards the green. Hall effect measurement has shown that the resistivity of the samples changes dramatically when THF changes.

Structural, electrical and optical characterization of InGaN layers grown by MOVPE

Bosi M;
2009

Abstract

We present a study on n-type ternary InGaN layers grown by atmospheric pressure metalorganic vapour phase epitaxy (MOVPE) on GaN template/(0001) sapphire substrate. An investigation of the different growth conditions on n-type Inx Ga1 − x N (x = 0.06 − 0.135) alloys was done for a series of five samples. The structural, electrical and optical properties were characterized by high resolution x-ray diffraction (HRXRD), Hall effect and photoluminescence (PL). Experimental results showed that different growth conditions, namely substrate rotation (SR) and change of total H2 flow (THF), strongly affect the properties of InGaN layers. This case can be clearly observed from the analytical results. When the SR speed decreased, the HRXRD scan peak of the samples shifted along a higher angle. Therefore, increasing the SR speed changed important structural properties of InGaN alloys such as peak broadening, values of strain, lattice parameters and defects including tilt, twist and dislocation density. From PL results it is observed that the growth conditions can be changed to control the emission wavelength and it is possible to shift the emission wavelength towards the green. Hall effect measurement has shown that the resistivity of the samples changes dramatically when THF changes.
2009
Istituto dei Materiali per l'Elettronica ed il Magnetismo - IMEM
InGaN
MOVPE
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/41111
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? 12
social impact