Epitaxial graphene fabricated by thermal decomposition of the Si-face of silicon carbide (SiC) forms a defined interface to the SiC substrate. As-grown monolayer graphene with buffer layer establishes an ohmic interface even to low-doped (e. g. [N] approximate to 10(15) cm(-3)) SiC, and a specific contact resistance as low as rho(c) = 5.9x10(-6) Omega cm(2) can be achieved on highly n-doped SiC layers. After hydrogen intercalation of monolayer graphene, the so-called quasi-freestanding graphene forms a Schottky contact to n-type SiC with a Schottky barrier height of 1.5 eV as determined from C-V analysis and core level photoelectron spectroscopy (XPS). This value, however, strongly deviates from the respective value of less than 1 eV determined from I-V measurements. It was found from conductive atomic force microscopy (C-AFM) that the Schottky barrier is locally lowered on other crystal facets located at substrate step edges. For very small Schottky contacts, the barrier height extracted from I-V curves approaches the value of 1.5 eV from C-V and XPS.
Electrical nanocharacterization of epitaxial graphene/silicon carbide Schottky contacts
F Giannazzo;A La Magna;
2014
Abstract
Epitaxial graphene fabricated by thermal decomposition of the Si-face of silicon carbide (SiC) forms a defined interface to the SiC substrate. As-grown monolayer graphene with buffer layer establishes an ohmic interface even to low-doped (e. g. [N] approximate to 10(15) cm(-3)) SiC, and a specific contact resistance as low as rho(c) = 5.9x10(-6) Omega cm(2) can be achieved on highly n-doped SiC layers. After hydrogen intercalation of monolayer graphene, the so-called quasi-freestanding graphene forms a Schottky contact to n-type SiC with a Schottky barrier height of 1.5 eV as determined from C-V analysis and core level photoelectron spectroscopy (XPS). This value, however, strongly deviates from the respective value of less than 1 eV determined from I-V measurements. It was found from conductive atomic force microscopy (C-AFM) that the Schottky barrier is locally lowered on other crystal facets located at substrate step edges. For very small Schottky contacts, the barrier height extracted from I-V curves approaches the value of 1.5 eV from C-V and XPS.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.