The integration of carrier profiles measured by SCM gives an electrical dopant activation of 10% for N implanted layer and of 4% electrical activation in A1 implanted layer. The carrier profiles and the active fraction of implanted atoms are correlated to the concentration and structure of residual defects. (C) 2001 Elsevier Science B.V. All rights reserved.
Two-dimensional carrier profiles were determined in ion implanted 6H-SiC by scanning capacitance microscopy (SCM). The measurements were performed on cross-section using metal covered Si tips. The implantations were performed into a SiC substrate at a temperature of 500 degreesC (on both n and p-type material) with 200 keV N+ and 300 keV Al+ ions in the fluence range 1 x 10(14)-2 x 10(5) cm(-2). Annealing processes were carried out at 1300 degreesC in argon flux. The defect profile before and after thermal processes were analysed with Rutherford backscattering spectroscopy and the residual defects were characterised by transmission electron microscopy.
Dopant profile measurements in ion implanted 6H-SiC by scanning capacitance microscopy
Roccaforte F;La Via F;
2001
Abstract
Two-dimensional carrier profiles were determined in ion implanted 6H-SiC by scanning capacitance microscopy (SCM). The measurements were performed on cross-section using metal covered Si tips. The implantations were performed into a SiC substrate at a temperature of 500 degreesC (on both n and p-type material) with 200 keV N+ and 300 keV Al+ ions in the fluence range 1 x 10(14)-2 x 10(5) cm(-2). Annealing processes were carried out at 1300 degreesC in argon flux. The defect profile before and after thermal processes were analysed with Rutherford backscattering spectroscopy and the residual defects were characterised by transmission electron microscopy.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
