Chemical vapor deposition in the low pressure regime of a high quality 3C-SiC film on silicon (100)-oriented substrates was carried out using silane (SiH4), propane (C-3 H-8), and hydrogen (H-2) as the silicon supply, carbon supply, and gas carrier, respectively. The resulting bow in the freestanding cantilever structures was evaluated by an optical profilometer, and the residual gradient stress (sigma(1)) in the films was calculated to be approximately between 15 and 20 MPa, which is significantly lower than the previously reported 3C-SiC on Si films. Finite element simulations of the stress field in the cantilever have been carried out to separate the uniform contribution (sigma(0)), related to the SiC/Si interface, from the gradient one (sigma(1)), related to the defects present in the SiC epilayer.
Low Stress Heteroepitaxial 3C-SiC Films Characterized by Microstructure Fabrication and Finite Elements Analysis
Anzalone R;Italia M;La Magna A;La Via F;D'Arrigo G
2010
Abstract
Chemical vapor deposition in the low pressure regime of a high quality 3C-SiC film on silicon (100)-oriented substrates was carried out using silane (SiH4), propane (C-3 H-8), and hydrogen (H-2) as the silicon supply, carbon supply, and gas carrier, respectively. The resulting bow in the freestanding cantilever structures was evaluated by an optical profilometer, and the residual gradient stress (sigma(1)) in the films was calculated to be approximately between 15 and 20 MPa, which is significantly lower than the previously reported 3C-SiC on Si films. Finite element simulations of the stress field in the cantilever have been carried out to separate the uniform contribution (sigma(0)), related to the SiC/Si interface, from the gradient one (sigma(1)), related to the defects present in the SiC epilayer.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
